What documents should I send for the issuance of a certificate for technical means?

The requirements for the certification of a technical device are set out in Section 11 of Decree No 528/2005 on physical security and certification of technical means, as amended.

What elements of alarm systems are certified?

The subject of the certification of alarm systems are:

  • Alarm Alarm Systems (ESS) equipment: PMS control panels, detectors, perimetric detection systems;
  • access systems;
  • emergency systems.

Should we replace the originally supplied certificate with a new one if the product has been re-certified?

The original certificates are not replaced by new ones.

After the expiry of the certificate, technical means for protecting classified information may be used provided that they are fully operational. This shall be verified by a functional test carried out at least once a year.

In the case of mechanical means of restraint and equipment for physical destruction of information, the functional test shall be evidenced by a record signed by the operator of the object or a person authorised by him. For other technical means, the functional test shall be supported by a test report or record in the operations log. (see Chapter 11 of Annex 1 to Decree No 528/2005, as amended).

Can safety door scores be increased by replacing the safety insert and fittings?

Replacement of the locking system (minimum control of the lock or cylinder and building or safety fittings) is possible only if it does not interfere in any way with the design of the door or the design of individual parts of the locking system. In this case, the certificate of fittings and the certificate of cylinder are also documented as proof of the security door certification.

Can another entrepreneur's classified information be stored in a secure area?

It is not possible to store the classified information of another entrepreneur in a secure area.

Can an object be without a secure area?

The amendment to Act No 412/2005 on the protection of classified information and security suitability, as amended, makes it possible to designate an object without a secure area.

Must there be a grille in the Secured area of the Confidential category on the window sill below as much as 5.5 m above the terrain?

In the category Confidential on a window sill below 5,5 m above the ground, there need not be a grille, only if the area of the secured area is protected by certified electrical security signalling devices (EZS), the installation of which is of at least type 3 (SS92 = 3). The installation of the Type 3 electrical signalling system represents the realization of spatial protection, casing protection and emergency system. The protected area in this case is type 1 (SS3=1).

What does cloak protection cover a secure area?

The casing protection of the secured area includes, in particular, the installation of an opening detector (magnetic contact) on openable openings (doors, windows), possibly a glass splinter detector and a shock detector. The installation of a glass splinter detector is recommended if there is a window or glass filler in the border of the secure area, it also depends on the nature of the borders and the location of the secure area. The shock detector is used for a higher scoring of the level of installation of alarm systems. The total number of detectors installed depends on the number of holes and the segmentation of the area of the secured area.